CAT5e/CAT6 Untwisting Tool

CAT5e/CAT6 Untwisting Tool




  • Sale
  • $159.99
  • $179.99

Save Your Fingertips While Doing Large Jobs!

“The tool does exactly what it says, I liked that the instructions are short and simple. It just takes a little practice to get it down but once you do it saves a ton of time especially if you're doing a lot of terminations. I won't put a cat5 or cat6 connector on without it now.” - Matthew R.

Why Buy Our Untwist Tool?

✅EASY TO USE: Quickly untwist CAT5e/CAT6 cables by simply pressing the untwist button on the driver then slowly feed the pair into the tool's head and release the button when the pair is untwisted. It can also be used to twist CAT5e/CAT6 cables easily with a push of a single button. 

Once the pairs are untwisted, there are two ways to straighten them. The first way is to press the wire against the mouth of the tool head before removing the untwisted pairs. The second way is to use the straightening grooves on the side of the tool head.


✅EFFICIENT: Delivers a powerful speed of 200 RPM that can untwist approximately 2,400 pairs before the driver needs to be recharged. The battery only takes 45 minutes for a full recharge and it can be used while charging. It also has a coupling boot that keeps the Untwist Tool's head locked in place even on the stiffest of conductors. 


📋Frequently Asked Questions:


Q: Does it run while charging?

A: Yes, it can be used while plugged in and charging.


Q: Will this tool work on bonded twisted pair cable?

A: It does not work with bonded cables.


Q: Does it work on CAT6A cables?

A: The Untwist Tool is designed for CAT5e/CAT6 and doesn’t work on CAT6 cables. Additionally, it is not designed for pairs that have additional materials twisted between the pairs.


Specifications: 

Untwist Tool Head Specifications:

  • Size: 1.81in x .65in // 46mm x 16.5mm 
  • Weight: .2oz
  • Shaft Size: 4mm // .156" (5/32")
  • Bit Material: S2 Alloy Steel

Untwist Tool Drive Specifications:

  • Driver Material: Aluminum
  • LEDs: Three
  • Rated Speed: 200RPM
  • Rated Torque: 0.15/3NM
  • Battery Type: Lithium
  • Charging Port: Micro USB
  • Charging Time: 45 Minutes
  • Size: 15mm x 173mm // .6in x 6.8in


Package Inclusions:

  • 1x Untwist Tool V2
  • 1x Rechargeable Driver
  • 1x USB Charging Cable
  • 1x Coupling Boot
  • 1x SGB Storage Bag
  • 1x Operation Manual

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
N
Noel R.
Must-have for Ethernet Cables

If you Terminate lots of ethernet cable and are looking to save time, this is the tool for you. It makes working with separating pairs a breeze.

S
Scotty
Faster than doing it by hands!

I'm an A/V / Network technician so when I have to sit behind a rack all day terminating RJ45 ends, the untwist tool always comes out! Especially on the days where I'm doing more than 30-50+ terminations. I'm the type to set up my terminations like an assembly line, and with the untwist tool it speeds up the whole process.

O
Oliver P.
It made the process easier

I started using this product when I started out doing AV. I've stripped cable before with different tools to help with straightening and typically I used my own hands. It took some time to getting used to since it's a new method but after that, it's smooth sailing!

M
Manuel E.
Saves Time and Your Fingers

If you are doing patch panel work this is nice to have in your arsenal, saves time and your fingers with CAT6. It has a learning curve, much like terminating coaxial or STP it requires some technique and practice to use it well, don't expect magic on first try.

R
Roger09
Game-changer!

The tool does work really well and as someone who has blistered their hands untwisting cat6 cable, buy this and never look back!

Back to Everything