From Tires to To-Do: Multi-Functional Storage!

“I never thought I would find something like this for such a low price with Prime shipping. I’m glad I did!” -  Marvin

Why Get Our Wall Mounted Folding Tire Storage Rack?

✅Convenient Storage Solution: Without a dedicated storage solution, tires can take up valuable floor space. That can lead to a chaotic and disorganized garage or store area. The Wall-Mounted Folding Tire Storage Rack is designed to maximize space, allowing you to store tires off the ground. This can be adjusted from widths of 32 inches up to 28 inches and holds up to 300 pounds

✅ Durable and Secure: The Wall-Mounted Folding Tire Storage Rack is typically built to hold heavy loads, ensuring your tires are stored securely and preventing them from rolling around or getting damage. Made of durable all steel. It has a scratch-resistant, silver powder-coated finish.

✅ Easy to install: The tire rack comes with all necessary hardware and can be mounted on both finished and unfinished walls. A stud finder and cordless drill are recommended for a hassle-free installation.

📓FREQUENTLY ASKED QUESTIONS

Q: How can I find the right size tire storage rack for my needs?

A: To find the right size, measure the dimensions of the tire you plan to store and look for a rack that specifies compatibility with these dimensions.

Q: Can I use a wall-mounted rack outdoors?

A: While some wall-mounted tire storage racks may be suitable for outdoor use,  it’s essential to check the product specification for weather resistance. Ideally, they should be used in a sheltered environment to protect the tires from extreme weather conditions.

🌟REMINDERS

• Using a stud-finder, locate 2 wall studs that are 32" to 48" on center. Using a pencil, mark the top mounting hole centers. Make sure the holes are level. Pre-drill the 2 marked holes using a 3/16" drill bit. 

• IMPORTANT: The Unit MUST be installed into wall studs. Do not use wall anchors for mounting directly to sheet rock.

🌟STEP-BY-STEP instructions

• Mount the Vertical Tubes of the Left & Right Brackets (A&B) with Lag Screws (C), using a 1/2" nut driver or socket wrench, making sure holes the are positioned as shown. Do not fully tighten the top screws at this time. Make sure that the Vertical Tubes of the Left & Right Brackets (A&B) are vertically level, then drill through the remaining 2 holes in each Bracket (A&B). Fasten with remaining Lag Screws (C) and fully tighten all of the Lag Screws 

• Insert the smaller diameter Round Tubes (E) into the larger diameter Round Tubes (D). Using a 9/16" nut driver or socket wrench, fasten them to the horizontal tubes of the Left & Right Brackets (A & B) with 3/8" x 2" Hex Bolts (F) in the position that best supports your tires. 

• Make sure that all Fasteners are fully tightened, and if necessary, adjust tightness so that the unit folds easily for storage. Store the unit in a folded position by locking it closed with the side hooks, as shown.

⚙️ Specifications:

• Color:  Silver

• Item Weight: 14.9 lbs

• Shelf Type: Hanging Shelf

• Shelf Weight Capacity: 300 Pounds

• Material: Steel

• Product dimensions:  22"D x 22.5"W x 24.5"H

📦Package Inclusion: 

• 1x Wall-mounted folding Tire storage Rack 

• Hardware