Your Multipurpose Workstation!
"Really impressed with this workstation. It's neat and a must-have for DIY projects. Also had no problem assembling it and the tiny holes I drilled were great!" - Simon B.
Why Buy Our Portable Rotary Tool Workstation?
✅DRILL PRESS STAND: This portable workstation can be used as an articulating drill press stand to drill perpendicular and angled holes in 15-degree increments, up to 90 degrees horizontal.
✅TOOL HOLDER: This can hold a rotary tool at 90 degrees horizontal for tasks such as polishing metal objects, sanding different shapes, and grinding metal pieces. It has a drill depth of 2 inches.
✅FLEX SHAFT STAND: This allows Telescopic adjustment to any height between 16 and 29 inches, Crow's nest provides onboard storage for drill bits, wrenches, etc.
- Ideal for crafts, hobbies, metalworking, and a variety of around-the-house jobs.
- Can be bolted onto your workbench.
- Tools not included, only the workstation itself.
Recommended For Dremel rotary tools. Compatible with dremel rotary tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220
📋Frequently Asked Questions:
Q: How to screw into the tool holder? Are the threads upside down?
A: When you place the tool into the holder, you should be able to hold the tool with one hand and use the other to hand tighten the overthrow nut from underneath. You should feel the tool tighten in the holder as the overthrow nut grabs the threading on the housing of the tool. Once the tool is stable in the holder, you can snug that overthrow bolt with the large wrench that comes with the Workstation. If you find you're turning and nothing happens, try turning in the other direction.
Q: What is the length and width of the base?
A: The base is approximately 6.75" wide x approximately 8" long. The height from the tabletop to the top of the post with a center extension all the way down is approximately 14 1/2".